W 350 Pickup V8-360 5.9L VIN I (1986)
vacuum signal hose remaining on the vapor canister. Insert the free nipple of the vacuum bleed-off valve into the other side of the blue
striped vacuum signal hose (Figure 9).
^
Locate the vacuum tree under the carburetor. Route the remaining vacuum hose from the overlay harness to the vacuum tree, and tie wrap it
to the existing harness. For vehicles with air conditioning, use the supplied vacuum tee, PN 3671410, to tee into the vacuum line which
comes from the bottom of the vacuum tree. For vehicles without air conditioning, remove the rubber cap from the nipple on the bottom of
the vacuum tree and connect the 32" vacuum hose from the overlay assembly from Step C (Figure 9).
FIGURE 10
