W 350 Pickup V8-360 5.9L VIN I (1986)
FIGURE 11
D.
Inspect the fuel reservoir. If a fuel reservoir is on the vehicle, proceed to Step E. If no fuel reservoir is on the vehicle, then remove and discard the
fuel hose connecting the fuel pump to the carburetor (Figure 10). Install the fuel reservoir, PN MD082109, supplied in the kit (Figure 11). Connect
the fuel reservoir to the fuel pump and the carburetor, using fuel lines supplied (Figure 11).
E.
Set new idle specifications as follows:
Curb Idle Speed
850 RPM
Propane Speed
950 RPM
Fast Idle
1300 RPM
A/C Idle Up
900 RPM
F .
Type "This vehicle has been updated with Altitude Emissions Package PN
4419426," on the Authorized Modification Label, PN 4275086, and place near the existing VECI label.
3.7L-1V, 5.2L-2V & 2.9L-4V Federal Altitude Emission
