W 350 Pickup V8-360 5.9L VIN I (1986)
ITEM
QTY.
(PN 4411981)
(PN 4411982)
Carburetor
1
4324607
4324608
EGR Valve
1
4287426
Altitude Compensator
1
4306202
4306202
Vacuum Harness
1
4287006
4287006
Screw (for mounting
2
6032468
6032468
altitude compensator)
VECI Update Label
1
4275084
4275084
REPAIR PROCEDURE
A.
Remove original carburetor and install new carburetor. Remove original EGR valve and install new EGR valve (manual only).
FIGURE 4
B.
Install altitude compensator on the dash panel behind the engine. The mounting location should be slightly above and to the right of the carburetor
(Figure 4).
C.
Install vacuum harness and hook-up as shown in Figure 4.
D.
Check idle specifications and reset if necessary.
E.
Type "This vehicle has been modified with Altitude Emissions Package PN 4411981 or PN 4411982" on the VECI Update Label.
F.
Affix VECI Update Label, PN 4275084, near original VECI label.
2.6L-2V Federal Altitude Emissions Package Pn 4411983 (Automatic Only)
(THIS PACKAGE APPLIES TO VEHICLES WITH CARBURETOR PN MD100638 ONLY)
Contains the following parts:
PART
ITEM
QTY.
NUMBER
Primary Main Jet (#110)
1
MD606029