W 350 Pickup V8-360 5.9L VIN I (1986)
FIGURE 5-D
FIGURE 5-E
B.
Remove the 4-second vacuum delay valve, PN 4167046 or 4173433, from the EGR valve. Disconnect the delay valve from the upper vacuum hose
and remove valve and rubber connector from the EGR valve side connector. Reconnect the free end of the 3/16" vacuum line left remaining on the
EGR valve to the vacuum nipple on the side of the EGR valve (Figures 5-D and 5-E).
FIGURE 7
C.
^ With a piece of tape, mark the shank end of a 3/16 drill bit a distance of 1-1/4" from the end. Remove the carburetor fuel inlet hose and insert
the fuel inlet orifice, PN 4418021, with the drill bit to a depth of 1-1/4". Reinstall the fuel inlet hose (Figure 7).
^
Cut two pieces of 3/16" diameter vacuum hose (serviced in bulk PN 4105167) into the following lengths, 2" and 32".
