W 350 Pickup V8-5.9L VIN Z (1990)
Brake Disc: Service and Repair
Rotor Removal and Installation
Removal
Fig 2 Removing Or Installing (Allen Head) Key Retaining Screw
1. Block brake pedal in the up position.
2. Raise vehicle to a comfortable working height and install jack stands.
3. Remove wheel and tire assembly.
4. Remove key retaining allen screw holding caliper to adaptor.
Fig 3 Removing Caliper Lock And Spring
5. Tap adaptor lock and spring from between caliper and adaptor.
6. Carefully separate caliper from adaptor.
-
Hang caliper out of the way.
-
Do not allow caliper to hang or be supported by hydraulic brake hose.
-
Inner brake shoe will remain on adaptor.
