Concord L6-258 4.2L VIN C 2-bbl (1982)
Fig. 12 Caliper & anchor plate abutment surfaces
Fig. 13 Installing inboard brake shoe anti-rattle spring
1.
Clean and lubricate abutment surfaces of caliper and the anchor plate with a suitable molydisulfide grease.
2.
Install inboard brake shoe anti-rattle spring on brake shoe rear flange, ensure looped section of clip is facing away from rotor. Install Teflon slipper plate
on leading anchor abutment surface, if equipped.
Fig. 6 Removing or installing inboard brake shoe