Concord L6-258 4.2L VIN C 2-bbl (1982)
Valve Guide: Service and Repair
Excessive valve stem-to-guide clearance will cause lack of power, rough idling and noisy valves, and may cause valve breakage. Insufficient clearance
will result in noisy and sticky functioning of valves and disturb engine smoothness of operation.
Valve stem-to-guide clearances are listed in the Engine Valve Specifications table. By using a micrometer and a suitable telescope hole gauge, check the
diameter of the valve stem in three places (top, center and bottom). Insert telescope hole gauge in valve guide bore, measuring at the center. Subtract the
highest reading of valve stem diameter from valve guide bore center diameter to obtain valve-to-guide clearance. If clearance is not within specified
limits, use the next oversize valve and ream bore to fit. Valves with oversize stems are available in .003 inch, .015 inch and .030 inch.
