Concord L6-258 4.2L VIN C 2-bbl (1982)
Air/Fuel Mixture: Adjustments
2SE Carburetor
Fig 70 - Idle Speed Drop Chart
Fig 72 - Idle Mixture Plug Removal
Idle mixture adjustment should only be performed if the mixture adjusting screw has been replaced or removed during carburetor overhaul.
Mixture adjustments should not be made as a normal service adjustment.
The mixture adjusting screw is recessed into the throttle body an sealed with a hardened steel plug. Do not remove plug and adjust idle mixture
unless performing carburetor overhaul, replacing the throttle body, or high CO emissions have been detected using proper test equipment.