Concord L6-258 4.2L VIN C 2-bbl (1982)
Engine Control Module: Description and Operation
Fig 2 - CEC Wiring System Diagram. 1981 6-258
Fig 3 CEC System 1982 4-151
OPERATION
This unit is a microprocessor that monitors the oxygen sensor voltage and, based upon the mode of operation, generates an output control signal
for the carburetor stepper motor.
-
If the system is in the closed loop mode of operation, the air/fuel mixture will he varied according to the oxygen content in the exhaust gas and
current engine operations.
-
If the system is in the open loom mode of operation, the air/fuel ratio will be based on a predetermined value that is determined upon several
engine operating parameters.
