Eagle L4-150 2.5L (1983)
Fig. 7 Removing or installing outboard brake shoe
3.
Install inboard brake shoe on caliper anchor plate.
4.
Install outboard brake shoe in caliper. Ensure the shoe flange is seated fully into outboard arms or caliper. It may be necessary to use a hammer to seat
the shoe.
5.
Place caliper assembly over rotor and position in caliper anchor plate. Ensure dust boot is not torn or incorrectly positioned by inboard brake shoe during
caliper installation.
6.
Align caliper with anchor plate abutment surfaces, then insert support key and spring between abutment surfaces, then insert support key and spring
between abutment surfaces at the trailing end of caliper and anchor plate. With a hammer and brass drift, drive caliper support key and spring into
position, then install and torque support key retaining screw to 15 ft. lbs.
7.
Refill master cylinder to within 1/4 inch of rim. Press brake pedal several times to seat shoes.
8.
Install front wheels and lower vehicle.
