Eagle L4-150 2.5L (1983)
FIGURE 11
2.
Assemble press plate 5073 to bearing carrier (1) (Fig. 11).
3.
Position bearing race (J) (Fig. 11) into bearing carrier
4.
Position bearing installer tool 5077 on outer bearing race.
NOTE:
Be sure appropriate end of bearing race installer tool 5077 is facing downward, toward bearing carrier. One end of bearing installer is marked
"Eagle" the other end is marked "Jeep".
5.
Rotate assembled press plate with bearing carrier and repeat steps 3 and 4 for inner race.
CAUTION: Do not overload press when installing bearing races. Bearing races should be flush with machined shoulder of bearing carrier
FIGURE 12
6.
Pack outer bearing (K) (Fig. 12) and coat race with AMC/Jeep/Renault All Purpose Lubricant P/N 8993630.
7.
Place bearing (K) into bearing carrier (L), (Fig. 12).
