Eagle L4-150 2.5L (1983)
Power Steering Pump: Service and Repair
Power Steering Pump Removal and Installation
MODELS w/4 CYL. ENGINE
1. Remove air induction hose, then remove power steering pump adjusting bracket mounting bolts.
2. Move power steering pump toward engine and remove drive belt.
3. Loosen return hose clamp and slide back along hose, then pull power steering pump forward and disconnect both pressure and return lines.
4. Remove bolts attaching power steering pump front mounting bracket to rear mounting bracket and engine.
5. Remove power steering pump, pivot bracket and front mounting bracket as an assembly.
6. Reverse procedure to install.
