Eagle L6-258 4.2L (1982)
Fig. 25 Stub shaft & rack positioning. Model 605
c. With light pressure to hold worm thread against piston, turn worm and valve counterclockwise slowly until one click is felt, then turn
clockwise to complete assembly.
d. Check relation of stub shaft and rack piston by threading worm and valve into rack piston until valve face and rack piston face are flush. Flats
on stub shaft and piston must be parallel. If not parallel, disassemble and repeat steps b and c.
Model 605 Steering Gears
Fig. 10 Lower thrust bearing & adjuster assembly. Model 605
Fig. 11 Stub shaft seals & snap ring. Model 605
