Eagle L6-258 4.2L (1982)
4. Remove axle shaft seal using suitable screwdriver..
5. Remove needle bearing using Tools J-29173 and J-2619-1. Remove ball bearing using suitable brass punch and hammer. If needle bearing tools
are not available, remove the differential, then the bearing using a 15-16 in. socket and three foot extension bar.
6. Install axle shaft bearings. Use tool J-29153 to install needle bearing and tool J-29154 to install ball bearing.
7. Install axle shaft seals using Installer J-29152 for the righthand side axle shaft and Installer J-29154 for lefthand side axle shaft.
8. Install axle shafts, then the retaining clips.
9. Apply suitable sealant to axle housing cover and install cover. Torque cover bolts to 20 ft-lbs.
10. Fill axle with 21-2 pints of SAE 85W-90 lubricant, then install assembly onto vehicle. Refer to Axle, Installation for procedure.
