eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Relays and Modules - Fuel Delivery and Air Induction > < Idle Speed/TP - Adjustment/Operation|Page 1508
Page 3
background image

435 rpm automatic transmission-low altitude models 
550 rpm automatic transmission-high altitude models

(2)

650 rpm on low altitude models 
725 rpm on high altitude models

Sole-Vac (Throttle Positioner) Operation - 4-Cylinder

Engine

Sole-Vac Component Function

Operation
Phase

Sole-Vac Vacuum Actuator

Sole-Vac Holding Solenoid

At start up

Energized for minimum of 60 seconds

Energized

Warm-up

Energized until carb. air temp. exceeds

Energized

Phase

13 0C (55~F)

During

Energized

Energized

accessory loads (AC, defogger, headlamps, power steering)

When engine

Energized

Energized

idle speed falls below predetermined rpm (1)

(1)

650 rpm on Man. Trans. models 600 rpm on Auto. Trans. models

NOTE:

The holding solenoid is energized whenever the engine is running. It is de-energized only when the ignition is turned off.

Filing Instructions

File this I.S. Note in your M.R. 171 binder.

Relays and Modules - Fuel Delivery and Air Induction > < Idle Speed/TP - Adjustment/Operation|Page 1508