eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Rear Wiper Motor Replacement|Page 2628 > < Wiper Motor|Adjustments
Page 1
background image

Wiper Motor: Service and Repair
Rear Wiper Motor Replacement

1. Disconnect battery ground cable. Remove wiper arm and blade.
2. Remove liftgate trim pad.
3. Disconnect wiring harness and ground wire.
4. Remove nut and pad securing wiper motor shaft to liftgate.
5. Remove screws securing wiper motor bracket, then separate bracket from motor.
6. Reverse procedure to install.

Rear Wiper Motor Replacement|Page 2628 > < Wiper Motor|Adjustments