Medallion L4-2165cc 2.2L (1988)
Paint: Technical Service Bulletins
Exterior Mirrors - Paint to Match Procedure
Models
1988-1989 BC Vehicles
Subject
Color Coat Replacement Mirrors
Index
BODY & SHEET METAL
Date
January 23, 1989
No.
23-52-89
P-107
(C23-60)
BODY CODE LEGEND
BC - Eagle Medallion
SYMPTOM/CONDITION
Some 1988-1989 Eagle Medallion models are equipped with dual body-color power remote-control mirrors. If these mirrors are replaced, the
replacement parts must be painted to match the exterior color of the vehicle.
REFINISH/PAINTING PROCEDURE
The following procedures for painting the polyamide exterior rearview mirrors has been provided by the Sherwin-Williams Paint Company:
1.
Clean the surface to be painted with solvent, using Sher-Will-Clean R7 K 156. Wipe completely dry.
2.
Scuff the entire surface lightly with a 3M Scotch Pad (7448). You may substitute 600 grit wet or dry sandpaper, but extra care should be used to
avoid gouging the surface.
3.
Clean the surface again with Sher-Will-Clean, R7 K 156.
4.
Mask the mirror glass and any other surface which will not be painted.
5.
Tack off the surface that will be painted.
6.
Apply either Ultra Base 7 Acrylic Urethane material for base coat/clear coat finishes or Acrylyd Acrylic Enamel for single state finishes. Be
certain to follow the mixing instructions printed on the label and add a hardener as required.
Also, use a Multi-flex V6V299 flex additive to increase the durability of the topcoat.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
23-60-60-02/03
. . . . . . . . . . .
0.4 Hrs.
FAILURE CODE:
69 - Off Color Or Discolored