Medallion L4-2165cc 2.2L (1988)
FIGURE 1
8805 - Trim Corrections
^
Rear Door Exterior Trim Panels -- All Wagon Models (Continued)
1.
Apply masking tape (A, Figure 1) to rear door as shown. This will protect the painted surface of the door from the bonding material.
2.
Clean all dirt, wax, etc.from the trim panel area on the rear door. Use 3M General Purpose Cleaner, P/N 08984, or equivalent.
FIGURE 2
3.
Apply adhesive (B, Figure 2) to the rear door exterior trim panel at the places shown. Use 3M Plastic and Emblem Adhesive, P/N 08061, or
equivalent.
4.
Press the trim panel in place.
5.
Remove the trim panel from the door.
6.
Inspect to see that the adhesive contacted the surface of the door.
7.
Allow the adhesive to set for at least 15 seconds.