Medallion L4-2165cc 2.2L (1988)
FIGURE 9
17.
Shrink the tubing with a heat gun (R, Figure 9).
FIGURE 4
18.
Secure the new harness wire (E, Figure 4) to the radiator cross-member with tie straps (P).
FIGURE 3
19.
Coil any excess wire at the Oxygen Sensor and secure it with a tie strap (Q, Figure 3).
20.
Install the ECU cover and wing nut.
21.
Install the battery holddown bracket. Then install and connect the battery.
