Medallion L4-2165cc 2.2L (1988)
Technical Service Bulletin # 507
Date: 911101
Recall - Fuse Block Wiring Terminal Could Overheat
No.
507
November, 1991
To:
All Jeep/Eagle Dealers
Subject:
Safety Recall # 507 - Fuse Block Wiring Terminal
Models:
1988 and 1989 Model Year Renault/Eagle Medallion Equipped With Air
Conditioning
Fuse block wiring terminals on the listed model vehicles may not provide adequate clamp load for positive electrical connection of the A/C blower motor
fuse blades. This may cause an increase in electrical resistance that could overheat, melt and possibly cause the fuse block and terminal wiring to burn.
To correct the condition, a new fuse holder must be installed, bypassing the original fuse block.
Vehicles which have already been corrected under warranty using Technical Service Bulletin # 08-55-90, (TSB Labor Operation Number 08-90-05-90)
do not require further service for the condition and have been deleted from the recall.
Details of this service action are explained in the following sections.
Note:
As an additional service aid, a videotape demonstrating the service procedure is included in the October, 1991 VideoTec program.
Vehicle List
Each dealer to whom involved vehicles were invoiced (or the current dealer at the same location) will receive a vehicle list with this letter arranged in
Vehicle Identification Number (VIN) sequence. Owners known to Chrysler are also listed. The lists are for dealer reference in arranging for service of
involved vehicles.
Each Jeep/Eagle dealer without a Vehicle List will receive an information copy of this letter by Compak Mail for use in performing the service on
involved vehicles upon request.
Parts and Owner Information
Parts
Important:
A quantity of parts will be distributed initially and billed to all involved dealers. This quantity will cover a portion of the total vehicles
involved. Additional parts may be ordered as needed to support customer demand.
Each involved dealer, to whom vehicles in the recall were invoiced (or the current dealer at the same location), will receive enough Fuse Holder Parts
Packages (PN C3940436) at dealer cost to service 25 % of those vehicles.
Each package contains the following components:
Quantity
Description
(1)
Fuseholder and wiring assembly
(1)
30 amp fuse
(3)
Heat shrink tubing section
(1)
Label (fuse location change)
(1)
Tie strap
Also included in each package is an instruction summary for convenient reference by the servicing technician.
Owner Notification and Service Scheduling
All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers at the earliest possible date. A copy of the owner notification letter is attached.
Enclosed with each owner notification is an Owner Recall Notification Form. The involved vehicle and recall are identified on the form for owner or
dealer reference as needed.