eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Recall - Fuse Block Wiring Terminal Could Overheat|Page 2229 > < Recall - Fuse Block Wiring Terminal Could Overheat|Page 2227
Page 4
background image

Figure 4

Figure 5

13.

Apply the supplied "Fuse Location Change" label to the inside fuse panel cover as shown in Figures 4 (1988 models) and 5 (1989 models).

14.

Secure the fuse panel cover and reconnect the battery.

15.

Check for proper operation of the A/C blower motor.

Warranty Claims

Completion Reporting and Reimbursement

Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by Chrysler to record recall service
completions and provide dealer payments.

Use the following labor operation number and time allowance:

Labor Operation

Time

Number

Allowance

Install new heater-A/C fuse holder

08507182

0.4 Hour

Add the cost of the recall parts package plus applicable dealer allowance to your claim.

Note:

See Warranty Policy and Procedure Manual, Chapter 6, Subsection H for complete recall claim processing instructions.

Parts Return

Not applicable.

Recall - Fuse Block Wiring Terminal Could Overheat|Page 2229 > < Recall - Fuse Block Wiring Terminal Could Overheat|Page 2227