Medallion L4-2165cc 2.2L (1988)
Automatic Shut Down (ASD) Relay: Service and Repair
Fig. 13 B+ (A) & Fuel Pump Relay (B) Location
These relays are contained within the splash-proof ECU housing mentioned above.
1.
Remove wing nut, then the splash-proof housing.
2. Pull back on retaining clip, then open inner housing door.
3. Disconnect electrical connector from B+ (A) or fuel pump relay (B), Fig. 13, then remove relay attaching screws and the relay(s).
4. Reverse procedure to install.