eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

ABOUT US
Manifold Pressure/Vacuum Sensor|Specifications|Page 1330 > < Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)]|Locations|Page 1326

Medallion L4-2165cc 2.2L (1988)

Page 1
background image

Manifold Pressure/Vacuum Sensor: Specifications

    With ignition switch in On position, output voltage at terminal B of MAP sensor should be 4 to 5 volts. With engine idling in Neutral and at operating
temperature, voltage at terminal B should be .5 to 1.5 volts. With ignition switch in On position, voltage at MAP sensor terminal C should be 4.5 to 5.5
volts.

 

Manifold Pressure/Vacuum Sensor|Specifications|Page 1330 > < Automatic Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)]|Locations|Page 1326