Medallion L4-2165cc 2.2L (1988)
FIGURE 3
IN SERVICE VEHICLES
When an ECU is removed from a vehicle that has been placed in service, indicate this by placing a daub of red paint (C) on the ECU as shown in Figure
(3) before returning the part to C.R.E.G.
Note:
Don't forget to send the ECU's removed from in service vehicles directly to C.R.E.G. operations per the Mailgram instructions of July 20,
1987.
DEALER STOCK VEHICLES
When an ECU is removed from a vehicle in dealer stock, do not mark the ECU. ECU's removed from vehicles in dealer stock should also be sent directly
back to C.R.E.G. as explained in the Mailgram of July 20, 1987.
FIGURE 1
RETROFIT PROGRAM ECU IDENTIFICATION
When installing an ECU identify the installation by placing a daub of red paint on the clamshell that houses the ECU as shown in Figure (1).
SRT/TIC INFORMATION
Operation Description
Number
Time
TIC
CO. Electronic Control
1245
0.3
0716
Unit - Replace
DCS dealers use warranty type 91.