eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Electronic Control Unit - Update/Handling Procedures|Page 121 > < ECU - Replacement|Page 116
Page 1
background image

Powertrain Control Module: All Technical Service Bulletins
Electronic Control Unit - Update/Handling Procedures

TSB #081287
August 12, 1987
TO:

ALL RENAULT DEALERS

SUBJECT:

MEDALLION ELECTRONIC CONTROL UNIT (ECU) UPDATE

The purpose of this communication is to inform all dealers of the progress of the Medallion ECU retrofit program and to advise them of their
responsibilities in making it a success.

FIGURE 1

FIGURE 2

All automatic transmission equipped Medallions ordered by dealers on or after July 27, 1987 have been equipped with the latest generation ECU. This
can be confirmed by the presence of a daub of paint (A) on the visible end of the clamshell that houses the ECU, as seen in Figure 1 and/or by the
presence of the homolagation number HOM 7700 742 979 (B) on the ECU below the part number as seen in the exploded section of Figure 2.
All Renault Dealers

Effective with the receipt of this communication, dealership service personnel must adhere to the following procedures:

NEW PARTS

Any unused (never installed on a vehicle) ECU's P/N 7700 736 396 in Parts Department stock must be returned to the PDC for credit. Do not mark the
ECU cover in any way.

Electronic Control Unit - Update/Handling Procedures|Page 121 > < ECU - Replacement|Page 116