Medallion L4-2165cc 2.2L (1988)
FIGURE 5
8.
Route the voltage source wire (E) along the radiator upper crossmember to the driver side of the engine compartment. Position the end of wire (L)
in the area shown in Figure 5.
FIGURE 6
Remove the Wingnut (J) and remove the ECU cover (K) (Fig. 6).
FIGURE 7
9.
Locate the green wire (N) leading to terminal "C" of the MAP sensor connector (M) (Fig. 7).
10.
Cut the green wire (N) 1-1/2 inches from the connector.
