Medallion L4-2165cc 2.2L (1988)
Figure 2 (1988 Models)
Figure 3 (1989 Models)
12.
1988 models: Route the fuse holder to the outboard side of the fuse block as shown in Figure 2. Ensure that the fuse holder is even with the
front edge of the fuse block. Tie wrap the fuse holder wiring to the wiring bundle behind the fuse block. Then secure the fuse block in its
mount.
1989 models: Route the fuse holder under the fuse block as shown in Figure 3. Then secure the fuse block in its mount, trapping the fuse
holder below the block. (A tie strap is not required on 1989 models.)
