Medallion L4-2165cc 2.2L (1988)
Alignment: Service and Repair
Vehicle Ride Height
Fig. 16 Vehicle ride height specifications
The vehicle ride height is adjusted by rotating the suspension bars clockwise or counterclockwise from its original position.
1. Measure vehicle ride height and compare to specifications shown.
2. Determine measurement necessary to raise or lower the vehicle, as follows:
a. Raise and support vehicle.
b. Remove both rear wheels.
c. Remove shock absorbers as described previously.
Fig. 6 Threaded rod tool assembly
d. Install, then adjust threaded rod tool Sus.Lm (A) with tool Sus.Lm.01 bracket until dimension X is 19.37 inches on sedan models or 18.97
inches on wagon models.