Medallion L4-2165cc 2.2L (1988)
FIGURE 1
3.
Remove the green protective cap from the new handle. Position the handle with the release plunger facing left (driver side) on the shift lever,
lightly rap the handle with a closed fist to seat the handle on the lever.
NOTE:
USE ONLY HANDLES WITH THE GREEN PROTECTIVE CAP AT THE BASE OF THE HANDLE (FIGURE 1).
4.
Check the transmission shift lever through all ranges - adjust shift cable if required.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
21-75-10-90
. . . . . . . . . . . . . . .
0.2 Hrs.
FAILURE CODE:
07 - Binds, Sticks or Seized