eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Dash Panel <--> [Dashboard / Instrument Panel] > < Interior Moulding / Trim|Service and Repair
Page 1
background image

Console: Service and Repair

Center Console Components

1. Remove ash tray from ash tray receiver.
2. Remove screw holding ash tray receiver to console.
3. Disconnect cigar lighter wire connector.
4. Remove screws holding front of console to mounting bracket.
5. Remove screws holding armrest assembly to the console.
6. Remove armrest assembly by pulling it up and out of the console.
7. Remove screws holding rear of console to mounting bracket.
8. Push out seat belt guides from inside of console.
9. Remove the console.

10. Reverse the above procedure.

Dash Panel <--> [Dashboard / Instrument Panel] > < Interior Moulding / Trim|Service and Repair