Recall for Front Brake Hoses & Left Rear Brake Tube - Premier L4-150 25L (1988)
13.
Tighten the brake tube nut to 14 ft.lbs. (19 N-m).
14.
Repeat steps 3 through 13 to replace the hose on the other side.
15.
Remove the brake pedal prop rod.
16.
Bleed both front brake calipers thoroughly, adding fluid to the brake fluid reservoir as necessary. Refer to the 1990 Premier/Monaco Service
Manual (# 81-270-0140) pages 5-7 for brake bleeding information.
B. Fuel Tank Shield Modification
1.
Locate the fuel tank shield mounted between the tank and the exhaust system tail pipe on the left rear of the vehicle underbody. (Figure 2)
2.
Measure 2.0 inches from the lower tip of the shield and mark a line, (Figure 2).
3.
Bend the shield on the marked line, away from the fuel tank (Figure 3).
4.
If the tube is positioned away (rearward) from the rear suspension crossmember, move it forward so it is positioned against the crossmember
(Figure 2).
