Premier L4-150 2.5L (1988)
^
For 1991 1/4 through 1992 MY vehicles: Cut the hose as close to the bottom of the crimp or collet as possible (Figure 4). Discard the cut off
section.
NOTE:
This is the heater hose which was connected to the coolant pressure bottle.
9.
Install the two provided 2 3/4" hoses on the heater core nipples using two of the medium sized clamps.
10.
For 1988 and 1989 MY vehicles:
^
Disconnect the right wiring harness convolute support clip and cut off the clip (Figure 5).