Premier L4-150 25L (1988): Engine Mount - Control Arm Interference
5.
Remove the engine cover and cut 1/4 - 3/8 of an inch off of each of the four engine cover supports, and reinstall the cover. Refer to the appropriate
service manual for removal/installation of the engine cover.
6.
If the boot is cut or inner CV joint is damaged, refer to appropriate service manual for removal/installation procedures.
7.
Connect the battery negative cable. Reset accessories.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
09-40-20-92 . . . . . . . . . . . . . . . . . . . . 1.9 Hrs.
(includes boot replacement and engine cover modification)
FAILURE CODE: 64 - Misalignment or Mismatched