eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Crankshaft Position Sensor - Intermittent No Start|Page 1197 > < Crankshaft Position Sensor - Intermittent No Start|Page 1195
Page 4
background image

FIGURE 5

FIGURE 6

11.

Modify a large paperclip (L) and remove the. white w/black tracer wire from the C1 cavity as shown in Figure 5. Insert the white w/black tracer
wire labeled C1 from the CPS patch harness into the C1 Cavity of the 32-way connector. Figure 6

Crankshaft Position Sensor - Intermittent No Start|Page 1197 > < Crankshaft Position Sensor - Intermittent No Start|Page 1195