eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

All Other Service Bulletins for Control Arm: > < CV Boot - Control Arm Interference|Page 2558
Page 1
background image

Control Arm: All Technical Service Bulletins
Lower Front Suspension Arm - Replacement

Models

1988 Eagle Premier

Subject

Lower Front Suspension Arm Replacement

Index

SUSPENSION

Date

September 12, 1988

No.

02-53-88

P-3796

(C02-54)

Eagle Premier vehicles built before fabrication sequence number 8644 are equipped with stamped lower front suspension arms. All Eagle Premiers,
sequence number 8644 and beyond, are equipped with cast lower front suspension arms. The cast style arm is the only arm offered as a service
replacement part.

If it becomes necessary to replace a lower front suspension arm on a vehicle with the stamped style arms, both the right and left side front suspension
arms must be replaced so that two different style arms are not on the same vehicle.

When ordering a stamped style front suspension arm (PN 32003136 or 32003137) for the early built Premiers you will receive a pair of the cast style
front suspension arms (PN 32003180 and 32003181). Install the cast style front suspension arms on both right and left sides of the vehicle.

If the vehicle is equipped with cast style arms, order either PN 32003180 (right) or 32003181 (left) as required. It is not necessary to replace both arms
on these vehicles if only one is required.

Policy:

Information only.

All Other Service Bulletins for Control Arm: > < CV Boot - Control Arm Interference|Page 2558