Premier L4-150 2.5L (1988)
Rear Door Window Glass: Service and Repair
STATIONARY QUARTER GLASS REMOVAL
1. Remove door trim panel and water shield.
Bright Trim Moulding
2. Remove screws holding exterior trim molding to door belt.
3. Remove bright trim molding.
4. Remove rear door glass.
5. Remove belt line inner weatherstrip from the door.
Rear Door Glass
6. Drill out pop rivet holding quarter glass frame to the top of door.
7. Remove bolt holding quarter glass frame to the door.
8. Slide quarter glass frame toward front of door.
9. Tilt top of quarter glass frame forward and remove quarter glass and frame from door.
STATIONARY QUARTER GLASS INSTALLATION
1. Insert quarter glass into the door and align properly.
2. Install bolt holding quarter glass to inner door panel.
3. Install pop rivet holding quarter glass and frame to top of the door frame.
4. Install door glass.
5. Install the belt line inner weatherstrip.
