eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

All Other Service Bulletins for Trim Panel: > < Front Door Upper Trim Panel - Loose
Page 2
background image

FIGURE 2

3.

Apply a piece of duct tape (30 x 50 mm) to the two positions on the door inner panel in the area where the trim panel clips attach (Figure 2).

4.

Install the upper door trim on the door inner panel by pulling it upward and striking the trim by hand to fully seat the clips over duct tape.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:

23-20-22-90 . . . . . . . . . .   0.2 Hrs. Labor Operation No.

FAILURE CODE:

K4 - Loose

All Other Service Bulletins for Trim Panel: > < Front Door Upper Trim Panel - Loose