eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Cooling System > < Recycled Coolant - Precautions
Page 1
background image

Water Pump: Service and Repair

Fig. 34  Water Pump Bolt Lengths & Locations

1.

Disconnect battery ground cable and drain cooling system.

2.

On models with power steering, remove power steering pump and bracket leaving hoses connected, and secure pump aside.

3.

On all models. remove timing belt as outlined, refer to TIMING BELT

4.

Remove alternator brace and disconnect hoses from water pump.

5.

Remove water pump bolts, noting length and position for installation, then remove water pump, gasket and O-ring.

6.

Reverse procedure to install. Refer to Fig. 34, for bolt length and position.

Cooling System > < Recycled Coolant - Precautions