Summit L4-1468cc 1.5L SOHC (1989)
Blower Motor: Service and Repair
Fig. 10 Blower Motor Replacement
1. Disconnect battery ground cable, then remove glove box assembly.
2. Remove righthand speaker cover, cowl side trim and knee protector.
3. Remove glove box frame, then the lap heater duct on models without rear heater or shower duct on models with rear heater.
4. Disconnect blower motor electrical connector, then the drain hose.
5. Remove MPI control unit, then the blower motor from blower motor assembly.
6. Reverse procedure to install.