Summit L4-1468cc 1.5L SOHC (1989)
Figure 3
3.
Reverse shift lever shoe has been beveled. Figure 3
Figure 4
4.
Reverse shift lever mounting bolt length increased from 18 mm to 20 mm. Figure 4
The new shift lever shoe and bolt are interchangeable with earlier built transaxle.
The new reverse shift lever and bearing retainer are interchangeable with earlier built transaxles only when replaced as a set.
The use of the above parts is recommended when reconditioning early built transaxles. Refer to the chart below for part number information.
FM2 (KM200) SERIES
FM3 (KM210) SERIES
OLD PARTS NEW PARTS
OLD PARTS
NEW PARTS
REVERSE SHIFT LEVER
MD733602
MD735922
MD719428
MD735920
BEARING RETAINER
MD719535
MD735926
MD719427
MD735925
REVERSE SHIFT LEVER SHOE
MD719566
MD735927
MD719566
MD735927
REVERSE SHIFT LEVER
MF241255
MD736249
MF241255
MD736249
MOUNTING BOLT
CHART
POLICY:
Information only.