Summit L4-1468cc 1.5L SOHC (1989)
Figure 7
3.
If excessive space is found between the belt line molding and the mirror bezel, remove the door sash garnish molding (Figure 6) and the door belt
line molding (Figure 7).
Figure 8
Form the door belt line molding with a pair of pliers so it will fit securely to the door panel (Figure 8).
Repair Procedure B
Figure 9
Locating Wind Noise - Procedure B
1.
If there is wind noise remaining after completing Procedure A, begin Procedure "B" by applying masking tape to the following areas.
