eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Front Door Window Regulator|Page 3822 > < Front Door Window Regulator|Page 3820
Page 3
background image

2. Remove the screws of the door panel which are shown In the illustration to remove the rear door center sash.

6. Removal Of Stationary Window Weatherstrip And 7. Stationary Window Glass

Remove the stationary window glass with the stationary window weatherstrip attached, by pulling toward the front of the vehicle.

SERVICE POINTS OF INSTALLATION

4. Installation Of Rear Window Regulator Assembly

1. Apply a coating of multipurpose grease to the rear window regulator.

Grease: MOPAR Multipurpose Grease Part No. 2932524 or equivalent

2. Tighten the front window regulator in the sequence shown in the illustration.

2. Installation Of Door Window Glass 

Tighten the door window glass in the sequence shown in the illustration.

Front Door Window Regulator|Page 3822 > < Front Door Window Regulator|Page 3820