eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Engine - Coolant Temperature Sensor/Switch > < Radiator Cooling Fan Temperature Sensor / Switch|Testing and Inspection
Page 1
background image

Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair

1.

Disconnect battery ground cable.

2.

Drain coolant from radiator into suitable container.

3.

Remove thermo sensor wiring from sensor located in lower radiator tank.

4.

Remove sensor from radiator.

5.

Reverse procedure to install. Torque sensor to 7-14 lb-ft.

Engine - Coolant Temperature Sensor/Switch > < Radiator Cooling Fan Temperature Sensor / Switch|Testing and Inspection