Summit L4-1597cc 1.6L DOHC (1990)
10.
Install crankshaft angle sensor as follows:
a. Position dowel pin on intake camshaft on the top.
b. Align punch mark on crankshaft angle sensor housing with notch in plate as shown in Fig. 29.
c. Install crankshaft angle sensor on cylinder head.
11.
Reverse remaining procedure to complete installation, noting the following:
a. Ensure camshaft and crankshaft timing marks are correctly aligned.
b. When installing rocker cover, apply sealant No. 4318034 or equivalent to semi-circular packing.
