Summit L4-1597cc 1.6L DOHC (1990)
Accelerator Pedal: Service and Repair
REMOVAL OF ACCELERATOR CABLE
Accelerator Cable Adjustment Bolts
1.
Loosen the accelerator cable adjusting nut.
2.
Disconnect the accelerator cable from the accelerator arm.
3.
Remove the accelerator cable.
REMOVAL OF ACCELERATOR PEDAL
Accelerator Cable And Pedal Assembly
1.
Remove the bushing and inner cable from the accelerator arm.
2.
Pull the left side of the accelerator pedal toward you, and then remove the accelerator pedal from the accelerator arm.
3.
Loosen the bolts of the accelerator arm bracket and remove the assembly.
INSPECTION
1.
Check the return spring for deterioration.
2.
Check the connection of the bushing to end metal fitting.
INSTALLATION
