Summit L4-1597cc 1.6L DOHC (1990)
FIGURE 1
5.
Install the new bushings on the stabilizer bar, position the brackets on the bushings being sure that the projection on the bushing is seated in
the brackets (see Figure 1).
6.
Align both the bushing/bracket assembly with the index marks and install bolts. Tighten the bolts to 17-26 N-m (12-19 ft.lbs.) torque.
7.
Lower vehicle.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 02-20-15-90
0.6 Hrs.
FAILURE CODE:
68 - Noisy
