Summit L4-1597cc 1.6L DOHC (1990)
Stopper Plate
7. Install throttle valve stopper plate.
8. Install four steel balls to valve body.
Spring Guide
9. Install low relief steel ball and spring to intermediate plate.
10. Install accumulator spring guide.
Separating Plate
11. Clean solenoid valve filter and install solenoid valve to plate.
12. Pull off guide pins from plate.
Transfer Plate
13. Insert two Special Tools, Guide Pins, into guide pin holes in upper valve body. Using guide pins as a guide, install transfer plate or intermediate
plate.
