eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Rear Wiper/Washer Switch Continuity Test|Page 3697 > < Rear Wiper/Washer Switch Continuity Test
Page 1
background image

Wiper Switch: Testing and Inspection
Wiper Switch Test

Fig. 33  Wiper/Washer Switch Removal

Fig. 34  Wiper/Washer Continuity Chart

1. Remove lower panel assembly and the column cover.
2. Disconnect column switch electrical connector, then check continuity between terminals for each switch.
3. If continuity is not as specified, replace switch.

Rear Wiper/Washer Switch Continuity Test|Page 3697 > < Rear Wiper/Washer Switch Continuity Test