Summit L4-1795cc 1.8L SOHC (1995)
gently.
4. Remove piston seal using finger tips.
CAUTION: Do not use screwdriver or other tool to prevent damage to inner cylinder.
5. Reverse procedure to assemble, noting the following:
a. Inspect cylinder and piston for wear or damage and/or corrosion. Inspect caliper body and sleeve for wear.
b. Apply suitable brake fluid to inner cylinder, then install piston seal into cylinder groove. Do not wipe special grease from piston seal.
c. Apply suitable brake fluid to piston and insert into cylinder without twisting.
d. Fill piston edge with grease from seal and boot repair kit or equivalent, then install piston boot.
e. Lubricate bushing, pin boot and slide pins with grease from seal and boot repair kit.
Rear
1. Remove caliper assembly as described under Caliper Replacement.
