Summit L4-1795cc 1.8L SOHC (1995)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor Location
REMOVAL
1. Drain approximately 2 quarts of coolant from the radiator drain plug.
2. Disconnect the electrical connector.
3. Remove the sensor with a suitable socket.
Engine Coolant Temperature Sensor Installation
INSTALLATION
1. Apply sealant to the threaded portion of the sensor.
Specified Sealant: MOPAR Part No. 4318034 or equivalent.
2. Install the sensor and tighten to the specified torque.
Specified Torque: 30 Nm (22 ft. lbs.)
3. Reconnect the electrical connector.
4. Refill the radiator and check for leaks.